few days ago, a customer from Nanning, Guangxi called Maosen Climbing Frame. During the phone conversation, he fed back an important question: Why does the mesh of the climbing frame mesh become blocked during the application process? And soon after this happens, rust marks of varying sizes will appear on the product itself. In response to this situation, Maosen Climbing Frame immediately reported the news to the technical team. When the technical team told us the reason for the rust marks on the product, we were all surprised. It turns out that this situation can also cause the climbing frame mesh to Corrosion and rust? What is the reason? Don’t worry, Maosen Climbing Frame will explain it to you in detail.
Speaking of this, Maosen Climbing Frame needs to remind all product users that in the process of using the climbing frame mesh, they must pay attention to maintenance issues. Before product acceptance, Maosen Climbing Frame always Despite all the advice, many customers still turn a deaf ear to this advice.
When we learned about the cause of rust marks on the climbing frame mesh, we immediately called the customer in Nanning, Guangxi, and carefully inquired about the use and maintenance of the product. Sure enough, As the technicians said, the problem is caused by the product users' neglect of management. The customer was confused and asked us why. In fact, the reason is very simple
During the long-term use of climbing mesh mesh by engineers, various stains will remain in the mesh, coupled with the influence of natural factors (such as rain and snow weather) , temperature rise and fall, etc.), the stains will gradually penetrate into the internal structure of the climbing frame mesh, eventually causing rust marks to appear on some parts of the surface, and this happens to be the most fatal point. When the rust marks are saturated with the product When the surface reaches the surface, it means that the oxide layer of the climbing frame mesh has failed, which will gradually turn into complete corrosion and rust, and eventually fracture and deformation. Fortunately, this situation was discovered relatively early. If it is used in this state for a few more months, the climbing mesh will be damaged. When the interests were stated to the Nanning customer, the customer couldn't help but be very surprised. It turns out that a small amount of sludge existing in the mesh can also cause the climbing mesh to corrode and rust.
Through the above examples, have you understood the importance of post-maintenance of climbing mesh? I hope this article can help more product users with similar problems.
News